Indofab Industries Hiring|Diploma| ITI|Mechanical Engineer

Company:Indofab Industries

Post: Quality Inspector/Mechanical Draftman/Estimate Engineer

Qualification: Diploma/ITI Mechanical Engineering


Location: Maharashtra

Salary: Depends On Interview

Selection process: Shortlisted Candidates Will Be Contacted For The Interview

Job Description:

  • Inspection of Machined Components on Own Shop-floor preferably when on Machine & its acceptance based on drawing and Job Application. With clearly noting the readings on Component Job Drawing. (Prior to that it Is desired for Workmen to Note his sizes by marker on the Job at actual position to assist Inspection) You have to encourage & prolifer quality workmanship by doing this to avoid rework.
  • Inspection of Machined & Fabricated components at Vendor Shop on readiness following the above procedure listed in point A.
  • In view of Very critical Machined components they have to checked at vendor shop, however focus should be clear that if the vendor is regular & have already manufactured the component a number of times, then the job is always be inspected on bringing it return to our shop.
  • In view of the Fabrication job, one must plan visit considering importance, urgency & our shop activities such that minimum hazzles are faced by either of them. The Visit for such job should be normally complete in all respect with clear records on job drawings, complete dimensional & visual Inspection.
  • For Items / Parts / components to be taken for assembly/sub-assembly it is a must to be checked at any prior occasion; if not it has to be done immediately to Tag it fit for use; this includes all small to big components.
  • Verify & Qualify Manufacturing Procedure, Job sub-assemblies/Assemblies to be completely fit.
  • Study Job Drawings on issue with production team and during meeting/discussions understand the manufacturing procedure adopted, visualize the end result from quality perspective & point out concerns if any. (note one must be very SMART during such remark so that the implementation is not delayed.)
  • This will qualify the job procedure adopted is correct/raise appropriate concerns to avoid confusion/rework/rejection at later stage.
  • Identify, record and formulate common manufacturing procedures for similar jobs, verify with QC engineer & Production Engineer for making Indofab Standard Job Procedures.
  • Once a Job assembly or Sub Assembly is complete record the FACT Sheet one per assembly/Sub-Assembly. In respective job QC folder. , Followed by job markings/tagging as may be required for erection, client or Indofab.
  • Recording as built records & Communicating of All Job drawing deviations.
  • Maintain measuring Instruments on shop floor and office in workable condition.


Employment Type
Permanent, Full Time

Interested Candidates Direct Apply Official Website:Apply Now